Slip Duct Fixing Plate

Slip Duct Fixing Plate

(Code: SFP)
Slip Duct Fixing Plate
Diameter of Floor Plate
Please Select With or Without Hole
In Stock
  1. #Description#

    Slip Duct Fixing Plates are designed to create a solid point to either start your ducting or fix your ducting solid to the floor.

    Fixing Plates are mainly used to create a solid fixing where there are no Walls to fix back to with Split Rings.

    The Fixing Plate can either be solid or have a hole through the middle of it.  If you securing your ducting to the Floor then you wouldn't need a hole through the plate,  if you are fixing the Plate to a Wall and you want to vent to the outside then you would need a Hole through the middle.

    The Fixing Plate has 4 holes in the plate to secure your ducting against most surfaces.

    The Fixing Plates are made from 2mm galvanised steel and 0.8mm galvanised collar to attach to your ducting.

    - Perfect finish to your Ductwork system.
    - Are manufactured using only the highest quality galvanised steel.
    - Designed to be fixed on to any flat surface and then the connection will suit Clip Duct.
    - Fixing Plate will be approx 50mm bigger than the diameter of the attached pipe.

    When ordering, please select diameter using the drop down box and then please select either a solid plate or to have a hole through the fixing plate.

  2. #Technical Data#

    Please contact us for a data sheet.

  3. #Direction of use#

    This section will be updated soon.