Err

Continue Shopping
DuroDyne Flexible Connector

DuroDyne Flexible Connector

Ducting Online
(Code: Durodyne )
Durodyne Flexible Connection  x 25mtrs  45 70 45
Ł 62.50
Add to cart
  1. #Description#

    All air duct installations for heating, cooling or ventilation are attached to mechanical equipment containing a fan or blower.
    Vibrations, noises and rattles resulting from operation of the fan or blower are transmitted into the metal ducts which carry the noises throughout the system.

  2. In order to isolate the vibration and noises to the source, an air- tight flexible joint, consisting of a fabric which is attached to sheet metal on both side, must be inserted between the equipment and the duct work.  This vibration isolator is called a "Flexible Duct Connector".

    All Duro Dyne Flexible Duct Connector Products are suitable for pressures of -10 to +15 wg.  Duro Dyne's standard ‘single fold’ metal to fabric grip has been tested by an independent testing laboratory to withstand a negative pressure of-10’’WC and a positive pressure of +17.25’’ WC with no tearing or visible separation. 

  3. #Technical Data#


  4. #Direction of use#
    When installing large size flexible connectors in a duct system, some type of stiffening agent is usually required to keep the unit relatively rigid. Some contractors use angle iron, while in many cases a bar slip connection is used to achieve this result. Now it is possible to save valuable time and material by forming Duro Dyne's Grip Loc Seam found on Metal Fab and Super Metal Fab, to rigidize the connector over long sections. This simple method of stiffening the sides of Duro Dyne Flexible Connector can eliminate the costly addition of angle iron used to perform this job. Here is how it is done:

    We will be adding our installation guide here soon.