Welcome, Guest ( Login )

SBFD - Single Blade Fire Damper

Quantity Quantity

SBFD

The circular single blade fire dampers are designed to stop the spread of fire through ducts when passing through walls or floors.

Suitable for horizontal or vertical installation.
The shaft handle provides external indication of blade position.
Damper operation can be checked and the damper reset without the need for access into the ductwork.
Standard release temperature 70ºC.
Access doors are not required for testing or resetting.
Over 2 hour fire resistance to BS476 Part 20.
Suitable for horizontal and vertical installation.
May be tested and reset externally.
Airflow may be in either direction.
Suitable for velocities up to 15 m/s.

If you have any questions please call our Sales Help Line on 01628 525290 and we will be happy to assist you.

Please select the diameter from the drop down menu below:-

No recommended products at the moment.

Spiral Pipe
View		Our spiral Pipe is manufactured using only highest quality galvanised steel, ranging from 0.5mm to 1.25mm thick. Standard Length = 3 metres Please select your item from the drop down menu below:-	click to see more

90 Degree Bend

View

Our Pressed & Fabricated bends are manufactured using only highest quailty galvanised steel, ranging from 0.6mm to 1.2mm.

Pressed bends range from 80mm to 250mm
Fabricated bends range from 224mm to 2000mm
All bends are half radius e.g. 250mm Bend = 125 throat radius. Different radius bends can be made upon request.

If you have any questions please call our Sales Help Line on 01628 525290 and we will be happy to assist you.

Delivery 1 - 3 days

Please choose an item using the drop down menu below.

NP - Male Coupler
View		NP's Fabricated or Pressed are manufactured using the Highest grade galvanised steel. NP's are genrally used to connect to lengths ot Spiral Pipe together. NP's are designed to be SE as standard and is a slip fit into Spiral Pipe. We can fabricate any size NP to suit your requirements. If you have any questions please call our Sales Help Line on 01628 525290 and we will be happy to assist you. Please select the diameter from the drop down menu below:-	click to see more

TCP - 100mm Tee Piece
View		TCP - 100mm Branch to ? TCP's are manufactured using only the highest quality galvanised steel. Galvanised Tee Piece @ 90 degrees. TCP's are a SE (small end) fitting throughout and is designed to slip into Spiral Pipe. We can Fabricate any size TCP Branch on pipe to suit your requirements. If you have any questions please call our Sales Help Line on 01628 525290 and we will be happy to assist you. Please select the size of duct that the branch will SIT ON from the drop down menu below:-	click to see more