Err

Clipped Fixing Plate

Clipped Fixing Plate

(Code: CFP)
Clip Duct Fixing Plate
Diameter
Please Select With or Without Hole
In Stock
(16 Item(s) In Stock)
  1. #Description#
    Clipped Fixing Plates are designed to create a solid point to either start your ducting or fix your ducting solid to the floor. Fixing Plates are mainly used to create a solid fixing where there are no Walls to fix back to with Split Rings.

    The Fixing Plate can either be solid or have a hole through the middle of it. If you securing your ducting to the Floor then you wouldn't need a hole through the plate, if you are fixing the Plate to a Wall and you want to vent to the outside then you would need a Hole through the middle

    The Fixing Plate has 4 holes in the plate to secure your ducting against most surfaces.

    The Fixing Plates are made from 2mm galvanised steel and 0.8mm galvanised collar to attach to your ducting.
    • Perfect finish to your Ductwork system.
    • Are manufactured using only the highest quality galvanised steel.
    • Designed to be fixed on to any flat surface and then the connection will suit Clip Duct.
    • Fixing Plate will be approx 50mm bigger than the diameter of the attached pipe.
    • Please select either a solid plate or to have a hole through the fixing plate.
  2. #Technical Data#

  3. #Direction of use#

    We will be adding our installation guide here soon.